EDGE™ MTP-LC Trunk (Multi Mode)

EDGE™ MTP® to LC uniboot nonstaggered harnesses provide breakout from 12-fiber MTP PRO connectors to LC uniboot connectors. These harnesses come with nonstaggered legs in several length options.

The EDGE module harness is designed to create a cross-connect point near the electronics by enabling port replication. This harness uses LC uniboot connectors to interface with the electronics and a non-pinned MTP PRO connector to connect into the back of a module. This solution can be used in a horizonal distribution area (HDA).

The EDGE trunk harness is designed to facilitate an interconnect point when the electronics are located in a separate area than the cross-connect or patching field. This harness uses LC uniboot connectors to interface with the electronics and a pinned MTP PRO connector to connect into a trunk. This solution can be used in an equipment distribution area (EDA).

We offer a variety of cable options, which you can see below. Contact us at info@bbtfiberoptic.dk with your specific requirements.

Polarity:

• Type-A with Universal LCs
• Type-B with Universal LCs

Fiber Category:

• 50 µm Multimode (OM3)
• 50 µm Multimode (OM4)

MTP® PRO:

• Pinned
• Non-pinned

Leg Length:

5 m / 10 m / 15 m / 20 m / 25 m / 50 m / 75 m / 100 m

Datasheets are available for every variation.